Beginner's guide

So you want to learn tatting

Tatting is lace made from one stitch, the double stitch, worked with a small shuttle or a long needle into rings, chains and picots. The gear costs very little and fits in a pocket. Here's how to choose a shuttle or needle, which thread size to learn on, the tiny hook and scissors you'll use, and the books that teach the flip.

By Colin B. · Published November 19, 2026 · Last reviewed November 19, 2026
White tatted lace necklace and matching earrings on a red velvet display

Photo by R. G on Unsplash

The 60-second version

If you only buy 3 things to start:

  1. Aerlit Tatting Shuttle with 2 Bobbins — A smooth plastic shuttle with a built-in hook for joins. The easy first shuttle.
  2. Cordonnet Cotton Thread, Size 20 — Tight, shiny cotton made for tatting, in more colors than you'll ever use.
  3. Learn Needle Tatting Step by Step, Needles and Book — Needles in several sizes with matched thread, for learning without the flip.
Budget total
$15
Typical total
$50
Two plastic shuttles, a ball of size 10 cotton thread, a small steel crochet hook and embroidery scissors come to about $15. Add a needle tatting kit, a second thread size and a beginner book for about $50.

We earn commission when you buy through links on this page, including Amazon. See our affiliate disclosure. Price tiers and budget totals shown above are editorial estimates; actual prices vary.

At a glance

Our top pick in each category

The fastest path through this guide — each best-starter pick by category. Scroll for the budget and upgrade alternatives.

CategoryTop pickPriceWhere to buy
ShuttlesHandy HandsAerlit Tatting Shuttle with 2 Bobbins$ See on Amazon →
Needle tattingHandy HandsLearn Needle Tatting Step by Step, Needles and Book$$ See on Amazon →
ThreadLizbethCordonnet Cotton Thread, Size 20$ See on Amazon →
Hooks and scissorsSusan BatesSteel Crochet Hook Set, 6 Sizes$ See on Amazon →
Before you buy anything

A few things worth knowing first

Pick shuttle or needle. Shuttle tatting is the traditional method and makes the tightest, neatest lace, but the flip takes practice. Needle tatting uses a long blunt needle, is easier to learn in a weekend, and makes slightly puffier stitches. Many people learn on a needle and move to a shuttle later.

Learn on thicker thread. Size 10 cotton is easy to see and forgiving. Size 20 is the usual size for patterns, and 40 or 80 make fine, delicate lace. Use mercerized cotton made for tatting or crochet, not sewing thread or yarn.

Match the needle to the thread. A tatting needle must be the same thickness from tip to eye so stitches slide off. Each needle size suits a narrow range of thread sizes, so buy them together.

Expect a slow start. The first rings often lock up and won't close. That's normal. Practice the double stitch with two colors of thread so you can see whether the knot flipped.

The gear

What you actually need

Shuttles

A tatting shuttle is a small boat-shaped spool, about 2.5 to 3 inches long, that holds thread and passes through the loop to form each stitch. The tips should nearly touch so thread doesn't unwind on its own. Many shuttles have a hook or point on one end for making joins through picots. Plastic shuttles are cheap and fine for learning. Buy two, since chains often need a second shuttle.

Aerlit Tatting Shuttle with 2 Bobbins Best starter
Handy Hands

Aerlit Tatting Shuttle with 2 Bobbins

$5.94 as of Nov 19, 2026

Our rating · In Stock

A smooth plastic shuttle with a small hook built into one end for joins, so you don't need a separate crochet hook. It has a removable bobbin that's easy to wind and fits nicely in the hand. Sold by Amazon. About $5.94, 4.5 stars from 454 ratings.

What we like

  • Built-in hook for joins
  • Removable bobbin
  • Smooth edges

What to know

  • Hook can snag thread at first
Tatting Shuttles, Assorted Colors Budget pick
Clover

Tatting Shuttles, Assorted Colors

$6.88 as of Nov 19, 2026

Our rating · In Stock

Simple plastic shuttles at a very low price. Two shuttles let you work chains and two-color patterns from the start, and the pointed tip helps with joins. Sold by Hour Loop. About $6.88, 4.7 stars from 549 ratings.

What we like

  • Very cheap
  • Two in a pack

What to know

  • Thread wraps on a fixed center
Red and yellow thread passing through the eye of a needle

Photo by amirali mirhashemian on Unsplash

Needle tatting

Needle tatting uses a long, blunt needle with an eye. You cast stitches onto the needle, then pull the thread through them to form a ring or chain. There's no flip to learn, so most people make their first ring in one sitting. The needle must match the thread size, since a needle that's too thin makes loose stitches and one that's too thick won't let them slide. Kits come with several sizes.

Learn Needle Tatting Step by Step, Needles and Book Best starter
Handy Hands

Learn Needle Tatting Step by Step, Needles and Book

$25.29 as of Nov 19, 2026

Our rating · In Stock

Tatting needles in several sizes from a company that specializes in tatting, with thread matched to them and instructions. It takes out the guesswork of pairing a needle with the right thread. Sold by Kitchen City. About $25, 4.4 stars from 237 ratings.

What we like

  • Needles matched to thread
  • Instructions included

What to know

  • Costs more than a shuttle
Tatting Needle Set, 4 Needles and 2 Threaders Budget pick
Handy Hands

Tatting Needle Set, 4 Needles and 2 Threaders

$12.90 as of Nov 19, 2026

Our rating · In Stock

A set of tatting needles in common sizes with a threader in a small case. A good way to try needle tatting if you already have thread. Check which thread size each needle suits. Sold by Amazon. About $12.90, 4.8 stars from 1,286 ratings.

What we like

  • Several sizes
  • Comes with a case

What to know

  • No thread included

Thread

Tatting uses mercerized cotton thread, which is tightly twisted, smooth and a little shiny. It slides well and holds crisp picots. Size 10 is thick and easy to learn on. Size 20 is the standard for most patterns, and 40 and 80 are for fine lace. The higher the number, the thinner the thread. Two contrasting colors are useful while learning, so you can see which thread a stitch is on.

Cordonnet Cotton Thread, Size 20 Best starter
Lizbeth

Cordonnet Cotton Thread, Size 20

$6.01 as of Nov 19, 2026

Our rating · In Stock

A six-cord Egyptian cotton thread made with tatters in mind. It is tightly twisted, slides easily, holds a crisp picot and comes in a huge range of solid and variegated colors. Sold by Amazon. About $6.01, 4.6 stars from 101 ratings.

What we like

  • Made for tatting
  • Lots of colors
  • Slides smoothly

What to know

  • Learn on size 10 first
Classic 10 Cotton Crochet Thread, White, 3 Pack Budget pick
Aunt Lydia's

Classic 10 Cotton Crochet Thread, White, 3 Pack

$13.45 as of Nov 19, 2026

Our rating · In Stock

Thick, cheap mercerized cotton that's easy to find. Size 10 is the easiest size to learn on, and a big ball lasts through weeks of practice rings. Buy two colors to see each flip. Sold by Amazon. About $13.45, 4.6 stars from 428 ratings.

What we like

  • Cheap
  • Easy to see stitches

What to know

  • Less smooth than Lizbeth
Cebelia Crochet Cotton, Size 20, Ecru, 405 Yards Specialty pick
DMC

Cebelia Crochet Cotton, Size 20, Ecru, 405 Yards

$21.86 as of Nov 19, 2026

Our rating · In Stock

A smooth, firm French cotton that many lace makers use for fine work. It makes crisp, even stitches and is a good second thread once you have the double stitch down. Sold by Express Brands. About $22, 4.6 stars from 439 ratings.

What we like

  • Very even thread
  • Crisp results

What to know

  • Fewer colors
Small gold embroidery scissors beside a card of green thread

Photo by lucas mendes on Unsplash

Hooks and scissors

You'll use a tiny steel crochet hook, around 0.6 to 0.75 mm, to pull thread through picots for joins and to hide ends. Small, sharp scissors cut thread close to the work without catching nearby stitches. A simple picot gauge, which can be a strip of card, keeps loops the same height. That's all the tooling tatting needs.

Steel Crochet Hook Set, 6 Sizes Best starter
Susan Bates

Steel Crochet Hook Set, 6 Sizes

$7.95 as of Nov 19, 2026

Our rating · In Stock

A set of small steel hooks that covers the sizes used for joins in size 10 through size 40 thread. Use the smallest that pulls a loop through a picot without splitting the thread. Sold by treasuresandmemories7. About $7.95, 4.6 stars from 84 ratings.

What we like

  • Covers several thread sizes
  • Cheap

What to know

  • Thin handles are hard to grip
4 Inch Forged Embroidery Scissors Budget pick
Singer

4 Inch Forged Embroidery Scissors

$9.79 as of Nov 19, 2026

Our rating · In Stock

Small, sharp scissors with fine curved tips that snip thread close to your work. They're light, cheap and small enough to keep in the same pouch as your shuttles. Sold by PF Global Shop. About $9.79, 4.7 stars from 144 ratings.

What we like

  • Sharp fine tips
  • Small and light

What to know

  • Not for heavy cutting
Going deeper

Your first month of tatting

Tatting looks complicated, but all of it comes from one stitch. A month is enough to make the double stitch, close rings, add picots, join rings and chains, and finish a small bookmark or snowflake. Here's a week-by-week plan.

Tatted lace necklace sets displayed on black and red velvet stands
Photo by R. G on Unsplash

Every tatted piece is double stitches, rings, chains and picots. Learn them in that order and give each one a week. Use size 10 cotton so you can see what your hands are doing.

Week 1: The double stitch and the flip

Wind a shuttle about half full. Wrap the thread around your left hand to make a loop, then pass the shuttle under and back over the loop thread. Let the loop go slack and pull the shuttle thread tight. The knot should flip onto the loop thread. That’s the first half. The second half goes the opposite way. Together they make one double stitch. Make rows of them and check that each one slides. If it doesn’t slide, it didn’t flip.

Red tatting shuttle with a strip of cream tatted rings
Photo by Chickxsy, CC BY-SA 3.0, via Wikimedia Commons

Week 2: Rings and picots

Make 6 double stitches, then leave a small gap of thread before the next stitch and push it up. That gap becomes a picot, a small loop. Make 6 more stitches, then pull the shuttle thread to close the ring. Make a dozen rings. Try to keep picots the same height. A strip of card cut to width makes a simple picot gauge.

Cream tatted lace with small flower motifs held up to the light
Photo by Justin Etre, CC BY-SA 4.0, via Wikimedia Commons

Week 3: Joins and chains

Joins hold the lace together. Pull a little loop of thread through a picot with a small crochet hook or the hook on your shuttle, pass the shuttle through it and snug it down. Then try chains. Chains need two threads, usually from two shuttles or a shuttle and the ball. Alternating rings and chains gives you edgings and the classic tatted look.

Gray tatted rings and chains with a green tatting shuttle
Photo by JuanaTrujillo, CC BY-SA 4.0, via Wikimedia Commons

Week 4: A small project

Pick a bookmark or a simple snowflake pattern in size 20 thread. Read the pattern notation first: R is ring, Ch is chain, ds is double stitch, p is picot. Hide the thread ends by weaving them back through stitches, or tat over them as you go. When it’s done, pin it flat on a towel, mist it with water and let it dry.

White tatted lace butterfly
Photo by Franz van Duns, CC BY-SA 4.0, via Wikimedia Commons

Need the gear? Our tatting gear guide covers shuttles, tatting needles, thread, small hooks and scissors, and the books that teach the flip. You might also like crocheting, embroidery and macrame.

Save your money

What you don't need yet

Beginners get pressured to buy a lot of stuff that doesn't help them play better. Here's what we'd skip on day one.

  • Fine size 80 thread — It looks lovely but hides mistakes and is hard to undo. Learn on size 10 or 20 first.
  • A shuttle collection — Two shuttles handle almost every beginner pattern. Fancy wood and bone shuttles can wait.
  • Beads — Beaded tatting is fun later. Get even double stitches and clean joins first.
  • Blocking boards — A towel, a few pins and a spray of water flatten small pieces just fine.
First week

Your first seven days

A short, real plan to get from gear-on-doorstep to actually playing.

  1. Buy two plastic shuttles or a needle tatting kit, plus size 10 cotton thread in two colors. · Buy
  2. Watch a slow video of the double stitch and the flip, and pause after each half. · Learn
  3. Wind a shuttle and make 20 double stitches on a ring, then check each one slides on the core thread. · Action
  4. Close your first ring of 12 double stitches with one picot in the middle. · Action
  5. Learn to join a second ring to the first picot with a small hook. · Learn
FAQ

Common questions

Is tatting hard to learn?

The flip is the hard part. On a shuttle, the knot has to transfer onto the other thread so it can slide. Most people get it in a few evenings. Needle tatting avoids the flip, so it's quicker to pick up.

Should I start with a shuttle or a needle?

If you want the classic method and tight, crisp lace, start with a shuttle. If you get frustrated easily or learn best from a quick win, start with a needle. The patterns are mostly the same.

What thread should I use for tatting?

Mercerized cotton thread made for tatting or crochet, like Lizbeth or DMC Cebelia. Start with size 10. Move to size 20 for most patterns and 40 or 80 for fine lace.

Why won't my ring close?

Usually one double stitch did not flip, so it locked onto the core thread. Hold the ring and tug the core thread. If it won't slide, find the stuck stitch and undo back to it. Two-color thread makes this easy to spot.

What can I make with tatting?

Bookmarks, earrings, snowflake ornaments, edgings for handkerchiefs and pillowcases, collars and doilies. A bookmark or a snowflake is a good first project.

Going further

Where to next

Authoritative sources

  • Wikipedia: Tatting — History of tatting, shuttle and needle methods, and the basic stitch.
  • The Ring of Tatters — A long-running international tatting society with free patterns, learning help and events.
  • Handy Hands — Maker of Lizbeth thread and tatting needles, with how-to material and patterns.
Rows of handmade tatted lace earrings in different colors on a black board

Photo by R. G on Unsplash